Electromagnetic Flow Meters


Tek-Flux 1400A Electromagnetic flow meter, also called Magmeters, it is a contact instrument used for measuring the volumetric flowrates of any fluid which can adequately conduct electricity in closed pipelines. These instruments are highly accurate, reliable, and stable devices that are used in various high-pressure industrial processes. Tek-Flux 1400A flow meter operates on the basis of Faraday’s Law of Induction. According to this principle, any change in the magnetic flux, linked to an electric circuit, causes an electromotive force (or voltage) to be induced in this circuit. The induced voltage is therefore directly proportional to the rate of change of magnetic flux with time. It can measure highly corrosive mediums such as concentrated acid and concentrated alkaline using PTFE lining material. By using Titanium electrodes, we can measure seawater, various chloride, and hypo-chloride fluids

  • Wide range of nominal diameter Size ½” to 28” (15 mm to 700 mm) with IP68 protection
  • Easy maintenance due to no moving parts
  • Uninfluenced by temperature, pressure, viscosity, and density
  • Used for wide application, can measure conductive fluid, without reference to fibre, solid or suspending material contained in liquid
  • High turndown ratio up to 1:100
  • It features high intelligence, with back light LCD display, menu setting control, three grades password protection, two-way measuring, slight signal removal, auto flow compensation, and other function.
  • Features high intelligence, which ensure empty pipe detection, self-detection, self-diagnostic functions, and safety alarms for upper and lower limit
  • Features SMART excitation, which ensures zero-point stability, high reliability, and low power consumption
  • Lining and electrode available in various materials which can measure nearly all conductive fluids
  • It has multiple signal output, pulse, Modbus RS485 or HART® or 4 to 20 mA
  • The power supply system has good voltage vibration ability
  • Meters Batching and Blending Totalization
Service Compatible conductive liquids
Measuring Range For flow range please refer the catalog
Lining Materials PTFE and Synthetic rubber
Electrode Material Stainless Steel, Hastealloy C
Accuracy ±0.5%
Repeatability 0.15%
Ambient Temperature Limits Sensor (Remote Mount): -4 °F to 158 °F (-20 °C to 70 °C)
  Converter: -4 °F to 122 °F (-20 °C to 50 °C)
  Integral Type: 14 °F to 122 °F (-10 °C to 50 °C)
Ambient Magnetic Field ≤ 400 A/m
Pressure Limit ≤ 150 PSI
Mounting Orientation Horizontal or vertical
Process Connection #150 ANSI or AWWA flanges
Output Signal Pulse and 4 to 20 mA or Modbus RS485 or 4 to 20 mA with HART
Power Requirements 18 VDC to 36 VDC or 85 VAC to 220 VAC
Conductivity ≥5 μs/cm
Enclosure Rating IP65
Weight Refer catalog for net weight
Agency Approvals CE
Tek-Flux 1400A Model Chart
Electromagnetic Flowmeter

    Etiam magna arcu, ullamcorper ut pulvinar et, ornare sit amet ligula. Aliquam vitae bibendum lorem. Cras id dui lectus. Pellentesque nec felis tristique urna lacinia sollicitudin ac ac ex. Maecenas mattis faucibus condimentum. Curabitur imperdiet felis at est posuere bibendum. Sed quis nulla tellus.


    63739 street lorem ipsum City, Country


    +12 (0) 345 678 9