NEMA 4X Pulse Input Rate/Totalizer Indicator

TEK-LCD 7803A SERIES NEMA 4X PULSE INPUT RATE/TOTALIZER INDICATOR

The Tek-LCD 7803A is a plastic, field-mounted flow rate/totalizer that can display flow rate and total from a pulse output flow meter. Its display has a five digit upper line for rate, a seven alpha-numeric character lower line for total, and comes standard with a backlight. The Tek-LCD 7803A is built in a NEMA 4X and IP65 rated plastic enclosure which can stand up to even the harshest environmental conditions. It can be powered from an included battery or a 24 VDC external power supply. Some features that really make the Tek-LCD 7803A stand out are its automatic unit conversions from flow meter k-factor units, ability to log up to 1024 data points, and SafeTouch® through-window buttons. These buttons allow the Tek-LCD 7803A to be programmed and operated through the cover window, thus eliminating the need to remove the cover in dirty or wet environments.

  • Automatic Rate, Total, and Grand Total Unit Conversions
  • On-Board Data Logging
  • Modbus Communications RS-485 Option
  • All Models Operate from -40 to 75°C (-40°F to 158°F)
  • Two Isolated Open Collector Pulse Outputs, Up to 5 kHz
  • Open Collector, NPN, PNP, TTL, Switch Contact, Sine Wave (Coil), Square Wave, Opto-Isolated Inputs
  • Plastic NEMA 4X, IP65 Enclosure
  • Isolated 4-20 mA Output for Rate, Total, or Grand Total
  • Battery, DC, or Output Loop-Powered Models
DisplayTop: Five digits (0 to 99,999), 0.7″ (17.8 mm) high, 7-segment, automatic lead zero blanking. Bottom: Seven characters, 0.4″ (10.2 mm) high, 14-segment automatic lead zero blanking. Symbols: Total, grand total, battery power/low battery,
high & low alarm, password lock, and SafeTouch button sleep mode/disable.
Display AssignmentTop Display: Rate or total; Bottom Display: Combinations of rate, total, grand total, units, and custom tag.
BacklightWhite LED, 10 sec auto-off when battery powered. Backlight deactivated below temperature ≈ -20°C
Display Update RateAmbient > -20°C: 1 Update/Second. Ambient < -20°C: 1 Update/10 Seconds.
Note: Update is dependent on gate settings
Display OrientationDisplay may be mounted at 90° increments up to 270° from default orientation
Over RangeDisplay flashes 99,999
Programming MethodFour SafeTouch through-window buttons when cover is installed. Four internal push buttons when cover is removed.
RecalibrationCalibrated at the factory to read frequency in Hz. No recalibration required
Max/Min DisplayMax/Min readings reached by the process are stored until reset by the user or until power to the meter is cycled.
Password Menu OptionsThree programmable password selections can be used for the following: restrict modification of settings, prevent resetting
the total or grand total without the password, or permanently lock out the ability to change or reset the grand total
or any grand total related settings(making a non-resettable grand total).
Non-Volaile MemoryAll programmed settings and total are stored in nonvolatile memory for a minimum of ten years if power is lost.
Power Options9-30 VDC, 2.2 W max; 4-20 mA Output Powered, 30 VDC max; battery power; 9-30 VDC power with battery backup; 4-20 mA Output Powered with Battery Backup.
Battery3.6 V Primary Lithium (Li-SOCl2), non-rechargeable Model PDABAT36C. Expected service life & recommended replacement interval is dependant on the operating conditions.
Isolation

All models: 500 V opto-isolated input-to-power/output with isolated input enabled.
PD6730-APA: 500 V input/power-to-output
PD6730-BMA: 500 V input/power-to-output
PD6730-BTA: 500 V input-to-output.
Note: Requires separate output supply

Data LoggingUp to 1024 records, recorded 4/day at specific times or at defined time intervals. Record contains date, time, rate, total, grand total, and log number.
Operating Temperature Range-40 to 75°C (-40°F to 158°F)total).
Storage Temperature Range-40 to 75°C (-40°F to 158°F)
Relative Humidity0 to 90% non-condensing
Connections:Screw terminals accept 12 to 22 AWG wire
EnclosureNEMA 4X, IP65 plastic field enclosure. Color: grey. Material: Polycarbonate with UV Stabilizer. Three ¾” NPT threaded
conduit openings. Two ¾” NPT plastic conduit plugs, with 1.29″ wrenching flats and a screwdriver slot, are included.
MountingMay be mounted directly to conduit. Two slotted flanges for wall mounting or NPS 1½” to 2½” or DN 0.13 to 0.21ft
pipe mounting.
Overall Dimensions5.67″ x 5.25″ x 4.18″ (W x H x D) (144 mm x 133 mm x 106 mm)
Weight:1.65 lbs (26.4 oz, 0.75 kg)
Warranty3 years parts and labor
Tek-LCD-7803A
 
img

    Etiam magna arcu, ullamcorper ut pulvinar et, ornare sit amet ligula. Aliquam vitae bibendum lorem. Cras id dui lectus. Pellentesque nec felis tristique urna lacinia sollicitudin ac ac ex. Maecenas mattis faucibus condimentum. Curabitur imperdiet felis at est posuere bibendum. Sed quis nulla tellus.

    ADDRESS

    63739 street lorem ipsum City, Country

    PHONE

    +12 (0) 345 678 9

    EMAIL

    info@company.com